1 2 Arbor
-
Amana Tool 47620 Router Arbor with Hex Nuts and Washers 5/16-24 NF D x 2-1/8 Height x 1/2 Inch SHK
Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue-and-groove joinery. Slotting cutters are available with either 2-wing or 3-wing cutters. Use in a handheld or table-mounted router.
$16.45$12.35 -
Amana Tool 47610 Router Arbor with Hex Nuts and Washers 1/4-28 NF D x 7/8 Height x 1/4 Inch SHK
Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue-and-groove joinery. Slotting cutters are available with either 2-wing or 3-wing cutters. Use in a handheld or table-mounted router.
$5.75$4.30 -
Amana Tool 47622 Router Arbor with Hex Nuts and Washers 5/16-24 NF D x 1-3/4 Height x 1/2 Inch SHK
Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue-and-groove joinery. Slotting cutters are available with either 2-wing or 3-wing cutters. Use in a handheld or table-mounted router.
$18.05$13.55 -
Amana Tool 47611 Router Arbor with Hex Nuts and Washers 1/4-28 NF D x 1/4 Height x 1/4 Inch SHK
Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue-and-groove joinery. Slotting cutters are available with either 2-wing or 3-wing cutters. Use in a handheld or table-mounted router.
$5.75$4.30 -
Amana Tool 47614 Router Arbor with Hex Nuts and Washers 1/4-28 NF D x 1/4 Height x 1/2 Inch SHK
Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue-and-groove joinery. Slotting cutters are available with either 2-wing or 3-wing cutters. Use in a handheld or table-mounted router.
$7.95$5.95Related Products: Slot Cutters -
Amana Tool 47615 Router Arbor with Hex Nuts and Washers 1/4-28 NF D x 15/32 Height x 1/4 Inch SHK
Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue-and-groove joinery. Slotting cutters are available with either 2-wing or 3-wing cutters. Use in a handheld or table-mounted router.
$5.40$4.05 -
Amana Tool 47604 Router Arbor with Hex Nuts and Washers 5/16-24 NF D x 7/8 Height x 1/2 Inch SHK
Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue-and-groove joinery. Slotting cutters are available with either 2-wing or 3-wing cutters. Use in a handheld or table-mounted router.
$5.75$4.30 -
Amana Tool 47616 Router Arbor with Hex Nuts and Washers 5/16-24 NF D x 1/4 Height x 1/4 Inch SHK
Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue-and-groove joinery. Slotting cutters are available with either 2-wing or 3-wing cutters. Use in a handheld or table-mounted router.
$7.20$5.40Related Products: Arbor -
Amana Tool 47605 Router Arbor with Hex Nuts, Washers and Ball Bearing 5/16-24 NF D x 1 Height x 1/2 Inch SHK
Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue-and-groove joinery. Slotting cutters are available with either 2-wing or 3-wing cutters. Use in a handheld or table-mounted router.
$12.45$9.35 -
Amana Tool SC559 2-PC Carbide Tipped 3-Wing Stile & Rail Tongue & Groove Cabinet Door 3-1/2 D x 2-1/8 CH x 1 & 1-1/4 Bore Shaper Cutter Set for 1 to 2-1/8 Material
…to 2-1/8" Material SC554 and SC558 are available with either 1/2" and 3/4" inside diameter. Rub collar (sold separately) for 3/4" arbor only. SC556, SC557 and SC559 are available with either 1" and 1-1/4" inside diameter. Rub collar (sold separately) for 1-1/4" arbor only. 3 Wing, carbide tipped.
$488.35$341.85 -
Amana Tool SC556 2-PC Carbide Tipped 3-Wing Stile & Rail Tongue & Groove Cabinet Door 3-3/8 D x 1-1/8 CH x 1 & 1-1/4 Bore Shaper Cutter Set for 5/8 to 1 to 1-1/8 Material
…to 2-1/8" Material SC554 and SC558 are available with either 1/2" and 3/4" inside diameter. Rub collar (sold separately) for 3/4" arbor only. SC556, SC557 and SC559 are available with either 1" and 1-1/4" inside diameter. Rub collar (sold separately) for 1-1/4" arbor only. 3 Wing, carbide tipped.
$396.05$277.25 -
Amana Tool 55254 Carbide Tipped Mortising Screw Cutter 1 Inch D x 9/16 CH 1/4-28 Thread
Carbide Tipped, 2 Flute Designed for use in standard lock mortising tools, these cutters can also be used in a standard router if mounted on a separate arbor.For 1/4" shank use arbor #47611. For 1/2" shank use arbor #47614. #55255 uses arbor #47616. View all available Threaded Arbors for Screw…
$45.30$34.00 -
Amana Tool SC557 2-PC Carbide Tipped 3-Wing Stile & Rail Tongue & Groove Cabinet Door 3-1/4 D x 1-3/4 CH x 1 & 1-1/4 Bore Shaper Cutter Set for 3/4 to 1-3/4 Material
…to 2-1/8" Material SC554 and SC558 are available with either 1/2" and 3/4" inside diameter. Rub collar (sold separately) for 3/4" arbor only. SC556, SC557 and SC559 are available with either 1" and 1-1/4" inside diameter. Rub collar (sold separately) for 1-1/4" arbor only. 3 Wing, carbide tipped.
$379.60$265.75 -
Amana Tool SC554 2-PC Carbide Tipped 3-Wing Stile & Rail Tongue & Groove Cabinet Door 2-3/4 D x 1 CH x 1/2 & 3/4 Bore Shaper Cutter Set for 5/8 to 1 Inch Material
…to 2-1/8" Material SC554 and SC558 are available with either 1/2" and 3/4" inside diameter. Rub collar (sold separately) for 3/4" arbor only. SC556, SC557 and SC559 are available with either 1" and 1-1/4" inside diameter. Rub collar (sold separately) for 1-1/4" arbor only. 3 Wing, carbide tipped.
$358.55$251.00 -
Amana Tool 56255 Carbide Tipped Mortising Screw Cutter 1 + 0.015 Dia x 9/16 Inch Cut Height x 1/4-28 Thread
Carbide Tipped, 2 Flute Designed for use in standard lock mortising tools, these cutters can also be used in a standard router if mounted on a separate arbor.For 1/4" shank use arbor #47611. For 1/2" shank use arbor #47614. #55255 uses arbor #47616. View all available Threaded Arbors for Screw…
$39.10$29.30 -
Amana Tool SC592 2-PC Carbide Tipped 3-Wing Stile & Rail Bead Exterior Door 2-7/8 D x 2 CH x 25/64 R x 1/2 & 3/4 Bore Shaper Cutter Set for 1-3/4 Material
…for template shaping such as arched or cathedral doors, etc. SC592 is available with either 1/2" and 3/4" inside diameter. Rub collar (sold separately) for 3/4" arbor only. SC593 and SC596 are available with either 1" and 1-1/4" inside diameter. Rub collar (sold separately) for 1-1/4" arbor only.
$487.20$341.05 -
Timberline 460-10 Carbide Tipped Tongue & Groove 3/8 Kerf x 1-5/8 D x 3/4 CH x 1/2 Inch SHK w/ Lower BB Router Bit Assembly for 1/2 - 5/8 Material
For 1/2" to 5/8" Material - 2 Flute with ball bearing guide One bit set includes: 2 cutters, 2 bearings and 1 arbor Tongue is cut as shown in assembly A. For groove cut, re-assemble the tool as shown in assembly B.
$61.05$42.75Related Products: Tongue And Groove -
Amana Tool SC562 2-PC Carbide Tipped 3-Wing Stile & Rail Bead Cabinet Door 3-9/16 D x 1-3/8 CH x 9/32 R x 1 & 1-1/4 Bore Shaper Cutter Set for 1 Inch Material
Designed for template shaping such as arched or cathedral doors, etc. Available with either 1" and 1-1/4" inside diameter. Rub collar (sold separately) for 1-1/4" arbor only!
$322.35$225.65 -
Amana Tool 53300 Slotting Cutter Assembly 2 Wing x 1-7/8 D x 1/16 CH x 1/4 Inch SHK Router Bit
Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue and groove joinery. Slotting cutters are available with either 2 wing or 3 wing cutters. Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor. Use with all handheld and table mounted routers.
$31.60$23.70Related Products: Slotting Bits -
Amana Tool 53302 Slotting Cutter Assembly 2 Wing x 1-7/8 D x 5/64 CH x 1/4 Inch SHK Router Bit
Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue and groove joinery. Slotting cutters are available with either 2 wing or 3 wing cutters. Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor. Use with all handheld and table mounted routers.
$31.60$23.70 -
Amana Tool 53306 Slotting Cutter Assembly 2 Wing x 1-7/8 D x 1/8 CH x 1/4 Inch SHK Router Bit
Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue and groove joinery. Slotting cutters are available with either 2 wing or 3 wing cutters. Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor. Use with all handheld and table mounted routers.
$32.75$24.55 -
Amana Tool 53307 Slotting Cutter Assembly 2 Wing x 1-7/8 D x 5/32 CH x 1/4 Inch SHK Router Bit
Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue and groove joinery. Slotting cutters are available with either 2 wing or 3 wing cutters. Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor. Use with all handheld and table mounted routers.
$33.20$24.90 -
Amana Tool 53308 Slotting Cutter Assembly 2 Wing x 1-7/8 D x 3/16 CH x 1/4 Inch SHK Router Bit
Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue and groove joinery. Slotting cutters are available with either 2 wing or 3 wing cutters. Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor. Use with all handheld and table mounted routers.
$33.20$24.90 -
Amana Tool 53310 Slotting Cutter Assembly 2 Wing x 1-7/8 D x 1/4 CH x 1/4 Inch SHK Router Bit
Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue and groove joinery. Slotting cutters are available with either 2 wing or 3 wing cutters. Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor. Use with all handheld and table mounted routers.
$33.75$25.35 -
Amana Tool 53309 Slotting Cutter Assembly 2 Wing x 1-7/8 D x 7/32 CH x 1/4 Inch SHK Router Bit
Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue and groove joinery. Slotting cutters are available with either 2 wing or 3 wing cutters. Each assembly includes a cutter, bearing for a 1/2" deep cut, and arbor. Use with all handheld and table mounted routers.
$33.75$25.35 -
Amana Tool SC580 2-PC Carbide Tipped 3-Wing Stile & Rail Ogee Cabinet Door 3-9/16 D x 1-1/2 CH x 3/16 R x 1 & 1-1/4 Bore Shaper Cutter Set for 1-3/8 to 1-3/4 Material
Designed for template shaping such as arched or cathedral doors, etc. Available with either 1" and 1-1/4" inside diameter. Rub collar (sold separately) for 1-1/4" arbor only!
$460.75$322.50 -
Amana Tool SC581 2-PC Carbide Tipped 3-Wing Stile & Rail Ogee Cabinet Door 3-9/16 D x 1-3/4 CH x 3/16 R x 1 & 1-1/4 Bore Shaper Cutter Set for 1-3/8 to 1-3/4 Material
Designed for template shaping such as arched or cathedral doors, etc. Available with either 1" and 1-1/4" inside diameter. Rub collar (sold separately) for 1-1/4" arbor only!
$463.80$324.65 -
Amana Tool SC460 2-PC Carbide Tipped 3-Wing Stile & Rail Concave Cabinet Door 2-7/8 D x 1-3/16 CH x 15/64 R x 1/2 & 3/4 Bore Shaper Cutter Set for 1 Inch Material
Designed for template shaping such as arched or cathedral doors, etc. Available with either 1/2" and 3/4" inside diameter. Rub collar (sold separately) for 3/4" arbor only!
$311.95$218.40 -
Amana Tool SC596 2-PC Carbide Tipped 3-Wing Stile & Rail Exterior Door 3-17/32 D x 2-1/8 CH x 25/64 R x 1 & 1-1/4 Bore Shaper Cutter Set for 2-1/8 Material
…for template shaping such as arched or cathedral doors, etc. SC592 is available with either 1/2" and 3/4" inside diameter. Rub collar (sold separately) for 3/4" arbor only. SC593 and SC596 are available with either 1" and 1-1/4" inside diameter. Rub collar (sold separately) for 1-1/4" arbor only.
$519.95$364.00Related Products: Sc596 -
Amana Tool SC593 2-PC Carbide Tipped 3-Wing Stile & Rail Bead Exterior Door 3-11/32 D x 1-31/32 CH x 25/64 R x 1 & 1-1/4 Bore Shaper Cutter Set for 1-3/4 Material
…for template shaping such as arched or cathedral doors, etc. SC592 is available with either 1/2" and 3/4" inside diameter. Rub collar (sold separately) for 3/4" arbor only. SC593 and SC596 are available with either 1" and 1-1/4" inside diameter. Rub collar (sold separately) for 1-1/4" arbor only.
$506.00$354.20Related Products: Sc593 -
Amana Tool SC584 2-PC Carbide Tipped 3-Wing Stile & Rail Bead & Cove Cabinet Door 3-9/16 D x 1-5/8 CH x 13/64 R x 1 & 1-1/4 Bore Shaper Cutter Set for 1-3/8 Material
Designed for template shaping such as arched or cathedral doors, etc. SC585 is available with either 1/2" and 3/4" inside diameter. Rub collar (sold separately) for 3/4" arbor only. SC584 is available with either 1" and 1-1/4" inside diameter. Rub collar (sold separately) for 1-1/4" arbor only.
$415.95$291.20 -
Amana Tool SC583 2-PC Carbide Tipped 3-Wing Stile & Rail Bead Cabinet Door 3-9/16 D x 1-9/16 CH x 5/16 R x 1 & 1-1/4 Bore Shaper Cutter Set for 1-3/8 Material
Designed for template shaping such as arched or cathedral doors, etc. SC582 is available with either 1/2" and 3/4" inside diameter. Rub collar (sold separately) for 3/4" arbor only. SC583 is available with either 1" and 1-1/4" inside diameter. Rub collar (sold separately) for 1-1/4" arbor only.
$415.95$291.20 -
Amana Tool SC558 2-PC Carbide Tipped 3-Wing Stile & Rail Tongue & Groove Cabinet Door 2-3/4 D x 1-3/4 CH x 1/2 & 3/4 Bore Shaper Cutter Set for 3/4 to 1-3/4 Material
…to 2-1/8" Material SC554 and SC558 are available with either 1/2" and 3/4" inside diameter. Rub collar (sold separately) for 3/4" arbor only. SC556, SC557 and SC559 are available with either 1" and 1-1/4" inside diameter. Rub collar (sold separately) for 1-1/4" arbor only. 3 Wing, carbide tipped.
$360.65$252.45 -
Amana Tool STF-6 Pair of Blade Stabilizers 6 D x 1 Inch Bore
…and vibration. Please note that the depth of cut will be reduced slightly and the table insert (if applicable) may obstruct the stabilizers when raising the blade height on table saws. You may use one or two stabilizers, depending on application and arbor length. Safety Guidelines for Saw Blades.
$25.45$19.10 -
Amana Tool MSB1296 Carbide Tipped Double-Face Melamine 12 Inch D x 96T H-ATB, -2 Deg, 1 Inch Bore, Circular Saw Blade
…'High-ATB' Grind Specifically designed to cut melamine chip-free on both sides provided that your table saw fence is square to the blade and the arbor is running true. Features thinner plate, more accute ATB grind. Improved results in certain melamine boards. Easily re-sharpened. Please note…
$228.10$171.05 -
Amana Tool 55256 Carbide Tipped Mortising Screw Cutter 1-1/8 D x 9/16 CH 1/4-28 Thread
Carbide Tipped, 2 Flute Designed for use in standard lock mortising tools, these cutters can also be used in a standard router if mounted on a separate arbor.For 1/4" shank use arbor #47611. For 1/2" shank use arbor #47614. #55255 uses arbor #47616. View all available Threaded Arbors for Screw…
$47.10$35.30
