1/2 Flush Cut
-
Amana Tool 44105 Fiberglass and Carbon Fiber Cutting, Diamond Coated Flush Trim 1/2 Dia x 1 Cut Height x 1/2 Inch Shank Router Bit
…Used in the mobile/motor home, caravan, star wagon, trailer, coach, boat and RV industry to trim laminated fiberglass boards. Excellent for Cutting: Fiberglass Fiberglass PCB board Carbon Fiber Metal Matrix Composite (MMC) Composites Carbon Fiber Reinforced Polymer (CFRP)Cuts fast…
$134.70$101.05 -
Amana Tool DRB-404 PCD Diamond Tipped Flush Trim 1/2 Dia x1 Inch Cut Height x 1/4 Inch Shank w/ Lower Ball Bearing Router Bit
The ultimate flush trim bit. The diamond-tipped cutting edges last at least 25 times longer than carbide-tipped flush trims, saving you the time and money. Can be used for flush trimming aluminum sandwich materials such as Aluminum Composite Material (ACM), ALPOLIC Copper Composite Material (CCM),…
$145.55$131.00 -
Amana Tool 51422 Solid Carbide Aluminum Flush Trim Up-Cut 1/4 D x 1/2 Cut Length x 1/4 SHK x 2-1/2 Inch Long Router Bit
Aluminum Cutting, Solid Carbide Flush Trim Router Bits 2 Flute with ball bearing guide Industrial quality Features a special grade carbide to perform quality cuts in aluminumThese flush trim router bits are designed to eject chips UP for clean cuts in aluminum and Aluminum Composite…
$115.55$86.70Related Products: Flush -
Amana Tool 51522 Solid Carbide Aluminum Flush Trim Down-Cut 1/4 D x 1/2 Cut Length x 1/4 SHK x 2-1/2 Inch Long Router Bit
Aluminum Cutting, Solid Carbide Flush Trim Router Bits 2 Flute with ball bearing guide Industrial quality Features a special grade carbide to perform quality cuts in aluminumThese flush trim router bits are designed to eject chips UP for clean cuts in aluminum and Aluminum Composite…
$115.55$86.70Related Products: Flush Trim Router Bit -
Amana Tool 44100 Fiberglass and Carbon Fiber Cutting, Diamond Coated Flush Trim 1/2 D x 1-3/4 CH x 1/2 Inch SHK Router Bit
…Used in the mobile/motor home, caravan, star wagon, trailer, coach, boat and RV industry to trim laminated fiberglass boards. Excellent for Cutting: Fiberglass Fiberglass PCB board Carbon Fiber Metal Matrix Composite (MMC) Composites Carbon Fiber Reinforced Polymer (CFRP)Cuts fast…
$155.50$116.65Related Products: Pcb -
Amana Tool 44106 Fiberglass and Carbon Fiber Cutting, Diamond Coated Flush Trim 1/2 D x 2 CH x 1/2 Inch SHK Router Bit
…Used in the mobile/motor home, caravan, star wagon, trailer, coach, boat and RV industry to trim laminated fiberglass boards. Excellent for Cutting: Fiberglass Fiberglass PCB board Carbon Fiber Metal Matrix Composite (MMC) Composites Carbon Fiber Reinforced Polymer (CFRP)Cuts fast…
$154.70$116.05 -
Amana Tool 57187 Carbide Tipped Flush Trim 3/4 D x 2 Inch CH x 1/2 SHK x 4-Flute Router Bit
4 flute design for a smooth chip-free cut Industrial quality Carbide tipped Chipping is virtually eliminatedAMAX Extended Life Features: 200% longer life time even when working with abrasive materials Superior geometric design Advanced grinding technology that improves the carbides'…
$108.85$81.65 -
Amana Tool 47110 Carbide Tipped Flush Trim 1/2 D x 1/2 CH x 1/2 SHK x 2-3/4 Inch Long Router Bit w/ Lower Ball Bearing
…the cutting edges trim the workpiece. With the router hand held, the template is on the bottom of the work. With a table-mounted router, the template is on top. The two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. #RC-47104 Insert Router Bit Insert flush…
$26.15$19.60 -
Timberline 190-24 Carbide Tipped Flush Trim 1/2 D x 1/2 CH x 1/2 SHK x 2-3/4 Inch Long Router Bit w/ Lower Ball Bearing
…the cutting edges trim the workpiece. With the router hand held, the template is on the bottom of the work. With a table-mounted router, the template is on top. The two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. #RC-47104 Insert Router Bit Insert flush…
$17.05$11.90 -
Amana Tool 47120 Carbide Tipped Flush Trim 1/2 D x 1/2 CH x 1/2 Inch SHK w/ Lower Ball Bearing 3-Flute Router Bit
Use these flush trim router bits for laminate work and for template & pattern work. For template applications, the bearing follows the template, while the cutting edges trim the workpiece. With the router hand-held, the template is on the bottom of the work. With a table-mounted router, the template…
$32.65$24.45 -
Amana Tool 47126-2 Carbide Tipped Flush Trim 1/2 D x 2 CH x 1/2 SHK x 4-3/8 Inch Long Router Bit w/ Double Ball Bearings
Make your own Dramatic Gooseneck Moldings 2 Flute Carbide Tipped Industrial Quality Designed to cut back side of raised panels for a flush alignment with door frames.
$69.00$51.75 -
Amana Tool 47106 Carbide Tipped Flush Trim 1/2 D x 1/2 CH x 1/4 SHK x 2-1/4 Inch Long Router Bit w/ Lower Ball Bearing
…the cutting edges trim the workpiece. With the router hand held, the template is on the bottom of the work. With a table-mounted router, the template is on top. The two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. #RC-47104 Insert Router Bit Insert flush…
$22.40$16.80 -
Amana Tool 47108 Carbide Tipped Flush Trim 1/2 D x 1 CH x 1/2 SHK x 3-1/4 Inch Long Router Bit w/ Lower Ball Bearing
…the cutting edges trim the workpiece. With the router hand held, the template is on the bottom of the work. With a table-mounted router, the template is on top. The two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. #RC-47104 Insert Router Bit Insert flush…
$24.60$18.45Related Products: Flush Trim Bit -
Timberline 190-22 Carbide Tipped Flush Trim 1/2 D x 1/2 CH x 1/4 SHK x 2-1/4 Inch Long Router Bit w/ Lower Ball Bearing
…the cutting edges trim the workpiece. With the router hand held, the template is on the bottom of the work. With a table-mounted router, the template is on top. The two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. #RC-47104 Insert Router Bit Insert flush…
$14.45$10.10 -
Timberline 190-26 Carbide Tipped Flush Trim 1/2 D x 1 CH x 1/2 SHK x 3-1/4 Inch Long Router Bit w/ Lower Ball Bearing
…the cutting edges trim the workpiece. With the router hand held, the template is on the bottom of the work. With a table-mounted router, the template is on top. The two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. #RC-47104 Insert Router Bit Insert flush…
$15.80$11.05 -
Timberline 190-38 Carbide Tipped Flush Trim 1/2 D x 1-1/2 CH x 1/2 SHK x 3-7/8 Inch Long Router Bit w/ Lower Ball Bearing
…the cutting edges trim the workpiece. With the router hand held, the template is on the bottom of the work. With a table-mounted router, the template is on top. The two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. #RC-47104 Insert Router Bit Insert flush…
$22.80$15.95 -
Timberline 190-42 Carbide Tipped Flush Trim 1/2 D x 2 CH x 1/2 SHK x 4-1/4 Inch Long Router Bit w/ Lower Ball Bearing
…the cutting edges trim the workpiece. With the router hand held, the template is on the bottom of the work. With a table-mounted router, the template is on top. The two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. #RC-47104 Insert Router Bit Insert flush…
$24.20$16.95 -
Amana Tool 47124 Carbide Tipped Flush Trim 1/2 D x 1-1/2 CH x 1/2 SHK x 3-7/8 Inch Long Router Bit w/ Lower Ball Bearing
…the cutting edges trim the workpiece. With the router hand held, the template is on the bottom of the work. With a table-mounted router, the template is on top. The two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. #RC-47104 Insert Router Bit Insert flush…
$37.55$28.20 -
Amana Tool 47124-2 Carbide Tipped Flush Trim 1/2 D x 1-1/2 CH x 1/2 SHK x 4-1/16 Router Bit w/ Double Ball Bearings
…the cutting edges trim the workpiece. With the router hand held, the template is on the bottom of the work. With a table-mounted router, the template is on top. The two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. #RC-47104 Insert Router Bit Insert flush…
$57.30$42.95 -
Amana Tool 47126 Carbide Tipped Flush Trim 1/2 D x 2 CH x 1/2 SHK x 4-1/4 Inch Long Router Bit w/ Lower Ball Bearing
…the cutting edges trim the workpiece. With the router hand held, the template is on the bottom of the work. With a table-mounted router, the template is on top. The two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. #RC-47104 Insert Router Bit Insert flush…
$40.90$30.65 -
Amana Tool 47140 Carbide Tipped Flush Trim 3/4 D x 1/2 CH x 1/2 SHK x 3-1/4 Inch Long Router Bit w/ Lower Ball Bearing
…the cutting edges trim the workpiece. With the router hand held, the template is on the bottom of the work. With a table-mounted router, the template is on top. The two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. #RC-47104 Insert Router Bit Insert flush…
$35.80$26.85 -
Amana Tool 47116 Carbide Tipped Flush Trim 1/2 D x 1/2 CH x 1/4 Inch SHK w/ Lower Ball Bearing 3-Flute Router Bit
Use these flush trim router bits for laminate work and for template & pattern work. For template applications, the bearing follows the template, while the cutting edges trim the workpiece. With the router hand-held, the template is on the bottom of the work. With a table-mounted router, the template…
$30.75$23.05 -
Amana Tool 47118 Carbide Tipped Flush Trim 1/2 D x 1 Inch CH x 1/2 SHK w/ Lower Ball Bearing 3-Flute Router Bit
Use these flush trim router bits for laminate work and for template & pattern work. For template applications, the bearing follows the template, while the cutting edges trim the workpiece. With the router hand-held, the template is on the bottom of the work. With a table-mounted router, the template…
$33.80$25.35 -
Timberline 190-28 Carbide Tipped Flush Trim 1/2 D x 1/2 CH x 1/4 Inch SHK w/ Lower Ball Bearing 3-Flute Router Bit
Use these flush trim router bits for laminate work and for template & pattern work. For template applications, the bearing follows the template, while the cutting edges trim the workpiece. With the router hand-held, the template is on the bottom of the work. With a table-mounted router, the template…
$20.05$14.05 -
Timberline 190-34 Carbide Tipped Flush Trim 1/2 D x 1 Inch CH x 1/2 SHK w/ Lower Ball Bearing 3-Flute Router Bit
Use these flush trim router bits for laminate work and for template & pattern work. For template applications, the bearing follows the template, while the cutting edges trim the workpiece. With the router hand-held, the template is on the bottom of the work. With a table-mounted router, the template…
$20.40$14.30 -
Timberline 190-46 Carbide Tipped Flush Trim 1/2 D x 1-1/2 CH x 1/2 Inch SHK w/ Lower Ball Bearing 3-Flute Router Bit
Use these flush trim router bits for laminate work and for template & pattern work. For template applications, the bearing follows the template, while the cutting edges trim the workpiece. With the router hand-held, the template is on the bottom of the work. With a table-mounted router, the template…
$31.60$22.10 -
Amana Tool 47118-2 Carbide Tipped Flush Trim 1/2 D x 1 Inch CH x 1/2 SHK w/ Lower Ball Bearing 3-Flute Extra-Long Router Bit
Use these flush trim router bits for laminate work and for template & pattern work. For template applications, the bearing follows the template, while the cutting edges trim the workpiece. With the router hand-held, the template is on the bottom of the work. With a table-mounted router, the template…
$63.95$47.95 -
Amana Tool 47131 Carbide Tipped Flush Trim 1/2 D x 2 CH x 1/2 Inch SHK w/ Lower Ball Bearing 3-Flute Extra-Long Router Bit
Use these flush trim router bits for laminate work and for template & pattern work. For template applications, the bearing follows the template, while the cutting edges trim the workpiece. With the router hand-held, the template is on the bottom of the work. With a table-mounted router, the template…
$66.00$49.50Related Products: Flush Trim Bit -
Amana Tool 47128 Carbide Tipped Flush Trim 1/2 D x 1-1/2 CH x 1/2 Inch SHK w/ Lower Ball Bearing 3-Flute Extra-Long Router Bit
Use these flush trim router bits for laminate work and for template & pattern work. For template applications, the bearing follows the template, while the cutting edges trim the workpiece. With the router hand-held, the template is on the bottom of the work. With a table-mounted router, the template…
$49.85$37.40 -
Amana Tool 47128-2 Carbide Tipped Flush Trim 1/2 D x 1-1/2 CH x 1/2 Inch SHK w/ Double Ball Bearing 3-Flute Extra-Long Router Bit
Use these flush trim router bits for laminate work and for template & pattern work. For template applications, the bearing follows the template, while the cutting edges trim the workpiece. With the router hand-held, the template is on the bottom of the work. With a table-mounted router, the template…
$71.90$53.90Related Products: Trim Bits -
Amana Tool 45487 Carbide Tipped Flush Trim Plunge Template 1/2 D x 1/2 CH x 1/4 Inch SHK w/ Upper Ball Bearing Router Bit
These flush trim plunge router bits are versatile, useful for template/pattern routing of parts,joints, and internal cuts, and can be used in hand-held and table-mounted routers. They are essentially plunge-cutting straight with shank-mounted ball-bearing pilots. The template is attached to the…
$39.70$29.80Related Products: Top Bearing -
Amana Tool 47228 Carbide Tipped Flush Trim Plunge Template 1/2 D x 1-1/4 CH x 1/2 Inch SHK w/ Upper Ball Bearing Router Bit
These flush trim plunge router bits are versatile, useful for template/pattern routing of parts,joints, and internal cuts, and can be used in hand-held and table-mounted routers. They are essentially plunge-cutting straight with shank-mounted ball-bearing pilots. The template is attached to the…
$40.25$30.20 -
Amana Tool 47402 Carbide Tipped 4 Wing Flush Trim Single Bevel Cutter Assembly 7/8 D x 1/4 CH x 1/2 Inch SHK w/ Lower Ball Bearing Router Bit
4-wing bevel trim cutter assembly! This tool offers the option of switching cutters-from flush trim to either of two bevel trims-without removing the bit from the router or even changing the depth-of-cut setup. Four flutes yield a smooth, crisp cut finish. All parts can be replaced individually.
$38.70$29.05 -
Amana Tool DRB-400 PCD Diamond Tipped Flush Trim 1/2 D x 7/16 CH x 1/4 SHK x 2-19/64 Inch Long Router Bit w/ Lower Ball Bearing
The ultimate flush trim bit. The diamond-tipped cutting edges last at least 25 times longer than carbide-tipped flush trims, saving you the time and money. Can be used for flush trimming aluminum sandwich materials such as Aluminum Composite Material (ACM), ALPOLIC Copper Composite Material (CCM),…
$98.50$88.65Related Products: Drb -
Amana Tool 47162 Carbide Tipped Flush Trim V Groove 5/8 D x 1 Inch CH x 1/2 SHK w/ Lower Ball Bearing Router Bit
Trim the edges of face frames flush with cabinet sides with this flush trim router bit. At the same time, cut a decorative 'V' groove to conceal the seam between the frame and the case. Carbide tipped 2 Flute with ball bearing guide
$43.90$32.95 -
Amana Tool 47412 Carbide Tipped Double Bevel Flush Trim Cutter Assembly 7/8 D x 1/4 CH x 1/2 Inch SHK w/ Center BB Router Bit
Trim both edges of a countertop in a single pass with this assembly! Four-flute cutters ensure a smooth cut finish. Cutters can be switched with the bit secured in the router and without changing depth-of-cut setting. Not intended for use in a laminate trimmer.
$74.30$55.70
