McAfee Secure. Tested Daily

23 32 Router Bit

1 - 12 of 24
View in: List | Grid
Sort by: Popularity | Lowest Price | Highest Price | Best Selling
Products per page: 12 18 36 48
Showing 1 - 12 of 24 | Next >
Amana Tool 49550...

SKU: 49550

Amana Tool 49550 Carbide Tipped Table Edge 1-3/4 R x 2-3/2 D x 5/8 CH x 1/2 Inch SHK w/ Lower Ball Bearing Router Bit

Cuts a wide profile with an arc based on the ellipse rather than the circle. With the optional 3/8" bearing, it will produce a fillet at the cuts edge. Good choice for handrails.Carbide-Tipped.

$75.60

Amana Tool 54113...

SKU: 54113

Amana Tool 54113 Carbide Tipped Classical Raised Panel 5/32 x 1-23/32 R x 3-9/16 D x 1/2 CH x 1/2 Inch SHK w/ Lower BB Router Bit

Architectural Cabinet Door Making Router Bits 1/2 Shank Industrial QualityDownload DXF tool file (limited items currently)Download PDF tool file (limited items currently)

$112.46

Amana Tool 53600...

SKU: 53600

Amana Tool 53600 Quadraset 1-7/8 D x 1/8-23/32 CH x 1/2 Inch SHK Router Bit

Amana Tool's Quadraset with its four cutters enables you to cut grooves and dados from 1/8" through 23/32" (3.2mm-18mm) in increments of 1/32" (0.1mm). Tongue and groove can also be achieved with proper set-up. Fully diagrammed instructions included for both fractional and metric sizes. Complete…

$90.19

Amana Tool RC-2241...

SKU: RC-2241

Amana Tool RC-2241 Mini Spoilboard Surfacing & Rabbeting Flycutter 1-1/2 D x 12mm (15/32) CH x 1/2 Inch SHK Insert Router Bit

…rabbeting, flycutter, leveler and bed skimming router bits featuring a two-knife design. Engineered with an Amana-exclusive carbide grade for the highest quality of cut, maximum cutting efficiency, and faster material removal process. These industrial router bits are complete with either two #HMA-12…

$121.64

Amana Tool 54295...

SKU: 54295

Amana Tool 54295 Carbide Tipped Colonial Door Casing 3/8 R x 1-17/32 D x 2-61/64 CH x 1/2 Inch SHK Router Bit

2 FluteCreate elegant colonial 2-3/4" wide door & window moldings.Max RPM: 12,000

$104.48

Amana Tool 49404...

SKU: 49404

Amana Tool 49404 Carbide Tipped Chamfer 45 Deg x 1-31/32 D x 3/4 CH x 1/2 SHK w/ Lower Ball Bearing Router Bit

…quality Chamfer or bevel edges for decorative effect or to form edge miter joints For best results use in a router table.Recommendation: The miniature router bits with 3/16" and 1/4" diameter ball bearing guides were designed for use in intricate and delicate projects with or without…

$74.96

Amana Tool 49563...

SKU: 49563

Amana Tool 49563 Carbide Tipped Table Edge Thumbnail 1/16 R x 2-3/8 D x 27/32 CH x 1/2 Inch SHK w/ Lower Ball Bearing Router Bit

Cuts a classic thumbnail profile. It’s just right for the edges of large tables and chest lids. All the profiles are designed for 3/4" thick tops.

$134.96

Amana Tool 49560...

SKU: 49560

Amana Tool 49560 Carbide Tipped Table Edge -Thumbnail & Bead 11/64 x 1-3/32 R x 2-9/16 D x 3/4 CH x 1/2 Inch SHK w/ Lower BB Router Bit

Cuts the thumbnail arc coupled with a bead around the tabletop surface. With the optional 3/8" bearing, it will produce a fillet at the cuts edge.Carbide-Tipped.

$104.96

Amana Tool 54208...

SKU: 54208

Amana Tool 54208 Carbide Tipped Edge Beading 5/32 R x 7/8 D x 1-1/32 CH x 1/2 Inch SHK Router Bit

Similar to the corner bead, but with a radiused, rather than a hard-edged, quirk. Must be used with a fence or edge guide. 2-FluteIndustrial QualityCarbide TippedSuitable for either handheld or table-mounted routers.

$37.46

Amana Tool MR0105...

SKU: MR0105

Amana Tool MR0105 Miniature 3/16 D Flush Trim with 3/16 D Ball Bearing x 7/16 CH x 1/8 Inch SHK Carbide Tipped Router Bit

…and money. Excellent for flush trimming composites.#RC-47104 Insert Router BitInsert flush trimming router bit priced comparably to brazed router bits with at least 4 times longer tool life.Recommendation: The miniature router bits with 3/16" and 1/4" diameter ball bearing guides were designed for…

$25.16

Amana Tool 55395 2...

SKU: 55395

Amana Tool 55395 2-Piece Carbide Tipped Lock Miter 22.5 Deg x 1-15/32 D x 7/8 CH x 1/2 Inch SHK Router Bit Set

…minimum 3/8" to maximum 3/4". For best results use the bits in a table-mounted router, and adjust each to the same evolution. That is, measure from the tabletop to the bit top when you make the cuts with the first bit, then set the second bit to the same height. Carbide-Tipped.Download DXF tool…

$89.96

Amana Tool 45752...

SKU: 45752

Amana Tool 45752 Carbide Tipped V Groove 100 Deg x 1-1/4 D x 53/64 CH x 1/4 Inch SHK Router Bit

Carbide Tipped V-Groove Router BitsCut decorative 'V' grooves and lettering on signs with these 'V' groove bits. Use with an edge guide to chamfer and bevel edges.Can be used with handheld, table-mounted and CNC routers.Excellent for Cutting Acrylic Foam Laminate Melamine MDF/HDF …

$68.59

 
minicart.loading