McAfee Secure. Tested Daily

5mm Drill

1 - 12 of 38
View in: List | Grid
Sort by: Popularity | Lowest Price | Highest Price | Best Selling
Products per page: 12 18 36 48
Showing 1 - 12 of 38 | Next >
Timberline 606-117...

SKU: 606-117

Timberline 606-117 Brad Point Drill Bit 5mm D x 5mm SHK

Brad Point drill bits of choice for precision wood cutting. They overcome the tendency to walk at the start of a hole and reduce tearout at the perimeter of the hole. The bits are made from high speed steel. They are fully ground and polished to give superior chip clearance.Most sizes are limited to…

$1.72

Amana Tool 304005...

SKU: 304005

Amana Tool 304005 Carbide Tipped Brad Point Boring Bit L/H 5mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

$14.53

Amana Tool 363005...

SKU: 363005

Amana Tool 363005 Solid Carbide Brad Point Drill Bit R/H 5mm D x 55mm Long x 5mm SHK

Solid Carbide Brad Point and V-Point Right Hand Metric Boring DrillsApplication: Boring machines for shelving hardware, etc. Use with 10mm shank drill adapters or 10mm shank drill bushings, shown below the table.

$28.91

Amana Tool 317015...

SKU: 317015

Amana Tool 317015 Solid Carbide Ditec Through-Hole Dowel Drill Boring Bit L/H 5mm D x 70mm Long x 10x25mm SHK

Ditec Solid Carbide Through-Hole Dowel DrillSpecial solid carbide grade cutting flute for long lasting performance. Not to be used in portable drills or handheld routers. Industrial quality Solid carbide Long lasting Ditec tips17,000 Holes CNC Drilled into Melamine Coated MDF

$33.78

Amana Tool 204005...

SKU: 204005

Amana Tool 204005 Carbide Tipped Brad Point Boring Bit R/H 5mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

$14.53

Amana Tool 55103 RTA...

SKU: 55103

Amana Tool 55103 RTA Furniture Drill/Countersink 10mm D x 5mm Drill D x 10mm SHK - 7mm Screw w/ Drill

Commonly used for RTA (Ready to assemble) furniture fittings. Specially-treated high speed steel countersink with polished slow-spiral drill bit. Will perform 3 tasks in one: pilot hole, clearance hole, and countersink.

$21.63

Amana Tool 364050...

SKU: 364050

Amana Tool 364050 Drill Adapter 10mm SHK for 5mm Drill

…quick insertion and removal from chuck. (Can be used on left or right hand drills).Use with 10mm diameter solid carbide drills (found by scrolling below the table).Note: Do not use in portable drills or hand held routers.Replacement set screw #67092 (new style #10-24) or #67097 (old style 5x8mm).

$11.24

Amana Tool 365050...

SKU: 365050

Amana Tool 365050 Reducing Bushing 10mm SHK for 5mm Drill

Use with solid carbide drills. Economic alternative to drill adapters. (Can be used on left or right hand drills).

$11.20

Amana Tool 201005...

SKU: 201005

Amana Tool 201005 Carbide Tipped Brad Point Boring Bit R/H 5mm D x 57mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

$13.41

Amana Tool 301005...

SKU: 301005

Amana Tool 301005 Carbide Tipped Brad Point Boring Bit L/H 5mm D x 57mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

$13.41

Amana Tool 55102 RTA...

SKU: 55102

Amana Tool 55102 RTA Furniture Drill/Countersink 7mm D x 3.5mm Drill D x 10mm SHK - 5mm Screw w/ Drill

Commonly used for RTA (Ready to assemble) furniture fittings. Specially-treated high speed steel countersink with polished slow-spiral drill bit. Will perform 3 tasks in one: pilot hole, clearance hole, and countersink.

$18.10

Amana Tool 314005...

SKU: 314005

Amana Tool 314005 Carbide Tipped Through-Hole Boring Bit R/H 5mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

$21.53

 
minicart.loading