McAfee Secure. Tested Daily

6mm Drill

1 - 12 of 17
View in: List | Grid
Sort by: Popularity | Lowest Price | Highest Price | Best Selling
Products per page: 12 18 36 48
Showing 1 - 12 of 17 | Next >
Timberline 608-520...

SKU: 608-520

Timberline 608-520 Self Centering Drill Bit Guide 5/64 D x 1/4 Quick Release Hex SHK for 6mm Screw

1/4" Hex Shank Design for Quick ReleaseCreate accurate screw holes when installing new hinges to a door. Spring-loaded end for locating hinge screw holes, includes HSS twist drill bit. Bright plated finish.

$6.13

Amana Tool 47643 6mm...

SKU: 47643

Amana Tool 47643 6mm Shank x 10mm Inner Dia. Dowel Drill/Boring Bit Adapter for CNC Standard Collet/Tool Holder

…the drilling creating cooler drilling area, no burning and longer lasting bit cutting edge.Total Indicated Run-out (TIR) is 0.00118" (0.03mm)Note: When securing drill bit into the adapter, make sure to align the flat part of the shank with both set screws.Warning: Max RPM = 8,00017,000 Holes Drilled

$19.46

Timberline 606-123...

SKU: 606-123

Timberline 606-123 Brad Point Drill Bit 6mm D x 6mm SHK

Brad Point drill bits of choice for precision wood cutting. They overcome the tendency to walk at the start of a hole and reduce tearout at the perimeter of the hole. The bits are made from high speed steel. They are fully ground and polished to give superior chip clearance.Most sizes are limited to…

$1.93

Amana Tool 20212...

SKU: 20212

Amana Tool 20212 Adjustable 6mm to 10mm (1/4 to 3/8) Universal Drill Depth-Stop

Can be clamped onto any drill* from 3mm to 10mm. An innovation and universal solution to the problem of drilling holes to an accurate depth. Special design to minimize any marks on the surface being drilled. User friendly quick assembly and easy drill-depth adjustment.* Drills not included.

$12.95

Amana Tool 204006...

SKU: 204006

Amana Tool 204006 Carbide Tipped Brad Point Boring Bit R/H 6mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

$16.00

Amana Tool 304006...

SKU: 304006

Amana Tool 304006 Carbide Tipped Brad Point Boring Bit L/H 6mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

$16.00

Amana Tool 201006...

SKU: 201006

Amana Tool 201006 Carbide Tipped Brad Point Boring Bit R/H 6mm D x 57mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

$15.61

Amana Tool 301006...

SKU: 301006

Amana Tool 301006 Carbide Tipped Brad Point Boring Bit L/H 6mm D x 57mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

$15.61

Timberline 500-20...

SKU: 500-20

Timberline 500-20 Replacement Screw for Workhorse Forstner Bit 6mm

Designed for plumbers and electricians.Self feed boring bits for plumbing and electrical contractors. Heat treated special steel alloy for maximum wear resistance with areplaceable feed screw that easily pull the bit through the material.Drill large diameter holes in wood for piping and conduit. …

$1.79

Amana Tool 414006...

SKU: 414006

Amana Tool 414006 Carbide Tipped Through-Hole Boring Bit L/H 6mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

$23.87

Amana Tool 314006...

SKU: 314006

Amana Tool 314006 Carbide Tipped Through-Hole Boring Bit R/H 6mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

$23.87

Amana Tool 416006...

SKU: 416006

Amana Tool 416006 Carbide Tipped Countersink L/H 16mm D x 16.5mm Long x 6mm SHK

Use with 10mm shank boring bits to drill & countersink for screws in one pass.

$23.24

 
minicart.loading