McAfee Secure. Tested Daily

Bearing 5 16

1 - 12 of 53
View in: List | Grid
Sort by: Popularity | Lowest Price | Highest Price | Best Selling
Products per page: 12 18 36 48
Showing 1 - 12 of 53 | Next >
Amana Tool RC-47104...

SKU: RC-47104

Amana Tool RC-47104 Insert Flush Trim 1/2 D x 20mm CH x 1/4 SHK x 2-5/16 Inch Long Router Bit w/ Lower Ball Bearing

…The miniature router bits with 3/16" and 1/4" diameter ball bearing guides were designed for use in intricate and delicate projects with or without tight spaces. Do not flush trim material more than half the diameter of the bearing and slow down feed to reduce load. Not guaranteed due to their…

$31.13

Amana Tool 47711...

SKU: 47711

Amana Tool 47711 Metric Steel Ball Bearing Guide 16mm Overall D x 6mm Inner D x 5mm Height

Bearings are double steel-shielded for extra rigidity and to inhibit dust. A special high-performance, high temperature grease is used for maximum life. Note: solvents should not be used to clean ball bearings. If a ball bearing becomes frozen (does not rotate freely) replace immediately.

$5.70

Amana Tool 51572...

SKU: 51572

Amana Tool 51572 Carbide Tipped Bullnose 3/8 R x 1-3/8 D x 1-5/16 CH x 1/2 Inch SHK w/ Lower Ball Bearing Router Bit

Ball bearing is the same size as the small diameter of the tool and rides against the template for an exact duplication. Ideal for shaping stair treads, window sills, table and counter edges, shelves and making moldings. The nose diameter (M) is the thickness of stock that can be nosed, i.e., given…

$74.96

Timberline 350-20...

SKU: 350-20

Timberline 350-20 Carbide Tipped Bullnose 3/8 R x 1-3/8 D x 1-5/16 CH x 1/2 Inch SHK w/ Lower Ball Bearing Router Bit

Ball bearing is the same size as the small diameter of the tool and rides against the template for an exact duplication. Ideal for shaping stair treads, window sills, table and counter edges, shelves and making moldings. The nose diameter (M) is the thickness of stock that can be nosed, i.e., given…

$56.18

Amana Tool 47716...

SKU: 47716

Amana Tool 47716 Metric Steel Ball Bearing Guide 16mm Overall D x 5mm Inner D x 5mm Height

Bearings are double steel-shielded for extra rigidity and to inhibit dust. A special high-performance, high temperature grease is used for maximum life. Note: solvents should not be used to clean ball bearings. If a ball bearing becomes frozen (does not rotate freely) replace immediately.

$5.78

Amana Tool 45460-S...

SKU: 45460-S

Amana Tool 45460-S Carbide Tipped Dado Clean Out 1/2 D x 1/4 CH x 1/4 Inch SHK w/ Upper Ball Bearing Router Bit

…The miniature router bits with 3/16" and 1/4" diameter ball bearing guides were designed for use in intricate and delicate projects with or without tight spaces. Do not flush trim material more than half the diameter of the bearing and slow down feed to reduce load. Not guaranteed due to their…

$26.85

Amana Tool 49644...

SKU: 49644

Amana Tool 49644 Carbide Tipped Bead Stile Cutter 23/64 R x 1-5/16 D x 19/32 CH x 3/8 R x 1/4 Inch SHK w/ Lower Ball Bearing Router Bit

…that nest perfectly intothe profiles cut by the matching regular bits. In addition, theinverted head allows you to profile edges that are out of the reach ofregular profile bits. These 1/4" shank bits will fit any router. All are equipped with ball bearing guides, either on the tip or on the shank.

$23.85

Amana Tool 49498...

SKU: 49498

Amana Tool 49498 Carbide Tipped Corner Rounding 1/8 R x 3/4 D x 3/8 CH x 1/2 Inch SHK w/ Lower Ball Bearing Router Bit

…found on this page include the miniature 3/16" and 1/4" diameter ball bearings for routing tight spaces, the In-Tech insert replacement knife series, diamond tipped (PCD) bits as well as the standard 1/2" diameter ball bearings. The basic edge-forming bit, the corner-rounding bit rounds an edge to a…

$21.08

Amana Tool 49498...

SKU: 49498

Amana Tool 49498 Carbide Tipped Corner Rounding 1/8 R x 3/4 D x 3/8 CH x 1/2 Inch SHK w/ Lower Ball Bearing Router Bit for Set #54314

Individual components for the Tambour Door/Appliance Garage Router Bit Set.Use these router bits as replacement tools for set #54314 (U.S. Patent No. 7,810,532).

$33.34

Amana Tool 55392...

SKU: 55392

Amana Tool 55392 Carbide Tipped Finger Joint Assembly 1-9/16 D x 1-3/8 CH x 1/2 Inch SHK w/ Upper Ball Bearing Router Bit

…pieces should slide together with their faces perfectly flush. This assembly includes five 2-wing finger cutters, one 2-wing straight cutter, a ball bearing guide, a 1/2" shank arbor, shims, spacers, and washers. The number of finger cutters used varies with the stock thickness; it can handle stock…

$111.90

Amana Tool 47822...

SKU: 47822

Amana Tool 47822 Ball Bearing Rub Collar 2-5/8 O.D. x 7/16 Height for 3/4 Spindle

Designed for template shaping, such as arched or cathedral doors, etc. Features a ball bearing center with a steel sleeve and is available with either 1/2", 3/4" or 1-1/4" inside diameter.

$31.46

Amana Tool 47097...

SKU: 47097

Amana Tool 47097 Carbide Tipped Down-Shear Multi Trimmer 3/4 D x 2 Inch CH x 1/2 SHK w/ Ball Bearings Router Bit

This adaptable double bearing guided cutter has down-shear design, which ensures a clean cut even in difficult materials. The two bearing design allows the cutter to be used with the template mounted on either side of the work and, consequently, it is possible to cut from either direction using only…

$53.40

 
minicart.loading