Dovetail Bits
-
Amana Tool 45805 Carbide Tipped Dovetail 10 Deg x 1/2 D x 5/8 CH x 1/2 Inch SHK Router Bit
The 10º dovetail bit is used with the Incra and Leigh dovetail systems.
$36.10$27.08Related Products: Dovetail Router Bits -
Amana Tool 45824 Carbide Tipped Dovetail 8 Deg x .260 D x .270 CH x 1/4 Inch SHK Router Bit
The 8 dovetail bits are designed especially for use with the Leigh Dovetail Jig.
$19.50$14.63 -
Amana Tool 45830-LH Carbide Tipped L/H Dovetail 8 Deg x .80 D x 1.275 CH x 1/2 Inch SHK Router Bit
The 8 dovetail bits are designed especially for use with the Leigh Dovetail Jig.
$21.95$16.46 -
Amana Tool 45804 Carbide Tipped Dovetail 14 Deg x 1/2 D x 1/2 CH x 1/4 Inch SHK Router Bit
The 14 dovetail bit is used with common half-blind dovetail jigs, as well as with Omnijig, Incra and Leigh jigs.
$24.15$18.11 -
Amana Tool 45808 Carbide Tipped Dovetail 7 Deg x 5/8 D x 7/8 CH x 1/2 Inch SHK Router Bit
For the Keller Dovetail Templates and certain Incra applications, 7 dovetail bits are required. (Bits for the Keller system are supplied with shank-mounted bearings.) This angle is also used in cutting stair stringers.
$47.00$35.25 -
Amana Tool 45833 Carbide Tipped Dovetail 14 Deg x 1/2 D x 1/2 CH x 1/4 Inch SHK Router Bit
The 14 dovetail bit is used with common half-blind dovetail jigs, as well as with Omnijig, Incra and Leigh jigs.
$22.30$16.73Related Products: Dovetail Router Bits -
Amana Tool 45830 Carbide Tipped Dovetail 8 Deg x .80 D x 1.275 CH x 1/2 Inch SHK Router Bit
The 8 dovetail bits are designed especially for use with the Leigh Dovetail Jig.
$21.95$16.46 -
Timberline 150-10 Carbide Tipped Dovetail 14 Deg x 1/2 D x 1/2 CH x 1/4 Inch SHK Router Bit
The 14 dovetail bit is used with common half-blind dovetail jigs, as well as with Omnijig, Incra and Leigh jigs.
$14.45$10.12 -
Amana Tool 45860 Carbide Tipped Butterfly Spine 14 Deg x 1-1/8 D x 1-3/4 CH x 1/2 Inch SHK Router Bit
Perfect for sliding dovetails and glue joints! Cut butterfly keys, splines and inlays with this bit, which complements Amana Tool 14 dovetail bits. Use in table-mounted router. Carbide-Tipped.
$80.50$60.38 -
Amana Tool 45890 Carbide Tipped Keller Dovetail 14 Deg x 1 Inch D x 1 Inch CH x 1/2 SHK w/ Upper Ball Bearing Router Bit
Specifically designed to match Keller's dovetailing system. Carbide-Tipped.
$35.35$26.51 -
Amana Tool 45832 Carbide Tipped Dovetail 14 Deg x 1/2 D x 1/2 CH x 1/4 Inch SHK Router Bit for Omnijig & Incra
The 14 dovetail bit is used with common half-blind dovetail jigs, as well as with Omnijig, Incra and Leigh jigs.
$19.80$14.85 -
Amana Tool 45838 Carbide Tipped Dovetail 7 Deg x 17/32 D x 25/32 CH x 1/2 Inch SHK Router Bit
For the Keller Dovetail Templates and certain Incra applications, 7 dovetail bits are required. (Bits for the Keller system are supplied with shank-mounted bearings.) This angle is also used in cutting stair stringers.
$20.60$15.45 -
Amana Tool 45820 Carbide Tipped Dovetail 7-1/2 Deg x 1/4 D x 5/16 CH x 1/4 Inch SHK Router Bit for Omnijig & Incra
The 7-1/2º dovetail bit is used with both Omnijig & the Incra dovetail system.
$31.65$23.74Related Products: Dovetail Router Bits -
Timberline 150-14 Carbide Tipped Dovetail 14 Deg x 1/2 D x 1/2 CH x 1/2 Inch SHK Router Bit
The 14 dovetail bit is used with common half-blind dovetail jigs, as well as with Omnijig, Incra and Leigh jigs.
$16.90$11.83 -
Timberline 150-08 Carbide Tipped Dovetail 9 Deg x 3/8 D x 3/8 CH x 1/4 Inch SHK Router Bit
The 9 dovetail bit is used for certain operations with the Incra dovetail system.
$14.45$10.12 -
Amana Tool 45837 Carbide Tipped Dovetail 7 Deg x 9/32 D x 1/2 CH x 1/4 Inch SHK Router Bit
For the Keller Dovetail Templates and certain Incra applications, 7 dovetail bits are required. (Bits for the Keller system are supplied with shank-mounted bearings.) This angle is also used in cutting stair stringers.
$18.15$13.61 -
Timberline 150-70 Carbide Tipped Dovetail 14 Deg x 1/2 D x 1/2 CH x 1/4 Inch SHK w/ Upper Ball Bearing Router Bit
These dovetail router bits have shank-mounted ball-bearing guides for routing dovetail slots following a template and pattern routing. The template must be mounted between the workpiece and the router. With a handheld router, the template must be on top of the work. With a table-mounted router, the…
$30.35$21.25Related Products: Dovetail -
Amana Tool 45882 Carbide Tipped Keller Dovetail 7 Deg x 7/16 D x 3/4 CH x 1/4 Inch SHK w/ Upper Ball Bearing Router Bit
Specifically designed to match Keller's dovetailing system. Carbide-Tipped.
$21.70$16.28Related Products: Dovetail Router Bits -
Amana Tool AMS-408 8-Piece Carbide Tipped Dovetail for Incra Jig & Jointech 1/2 Inch SHK Router Bit Set
Carbide tipped dovetail router bit set. For Incra Jig and Jointech 1/2" Shank
$234.90$176.18Related Products: Dovetail Router Bits -
Amana Tool 45828 Carbide Tipped Dovetail 8 Deg x 1/2 D x .825 CH x 1/4 Inch SHK Router Bit
The 8 dovetail bits are designed especially for use with the Leigh Dovetail Jig.
$20.70$15.53 -
Amana Tool 45850 Carbide Tipped Dovetail 14 Deg x 1/2 D x 1/2 CH x 1/4 Inch SHK w/ Upper Ball Bearing Router Bit
These dovetail router bits have shank-mounted ball-bearing guides for routing dovetail slots following a template and pattern routing. The template must be mounted between the workpiece and the router. With a handheld router, the template must be on top of the work. With a table-mounted router, the…
$40.45$30.34 -
Amana Tool 45884 Carbide Tipped Keller Dovetail 7 Deg x 5/8 D x 1 Inch CH x 3/8 SHK w/ Upper Ball Bearing Router Bit
Specifically designed to match Keller's dovetailing system. Carbide-Tipped.
$27.50$20.63 -
Amana Tool 45852 Carbide Tipped Dovetail 14 Deg x 3/4 D x 3/4 CH x 1/4 Inch SHK w/ Upper Ball Bearing Router Bit
These dovetail router bits have shank-mounted ball-bearing guides for routing dovetail slots following a template and pattern routing. The template must be mounted between the workpiece and the router. With a handheld router, the template must be on top of the work. With a table-mounted router, the…
$41.60$31.20 -
Amana Tool 45835 Carbide Tipped Dovetail 18 Deg x 1/2 D x .415 CH x 1/4 Inch SHK Router Bit
This 18 dovetail bit is used with the Leigh jig.
$24.10$18.08Related Products: Dovetail Router Bits -
Amana Tool 45827 Carbide Tipped Dovetail 8 Deg x 7/16 D x .650 CH x 1/4 Inch SHK Router Bit
The 8 dovetail bits are designed especially for use with the Leigh Dovetail Jig.
$20.70$15.53 -
Amana Tool 45816 Carbide Tipped Dovetail 14 Deg x 3/4 D x 3/4 CH x 1/2 Inch SHK Router Bit for Omnijig & Incra
The 14 dovetail bit is used with common half-blind dovetail jigs, as well as with Omnijig, Incra and Leigh jigs.
$51.80$38.85 -
Amana Tool 45818 Carbide Tipped Dovetail 14 Deg x 7/8 D x 7/8 CH x 1/2 Inch SHK Router Bit
The 14 dovetail bit is used with common half-blind dovetail jigs, as well as with Omnijig, Incra and Leigh jigs.
$51.80$38.85 -
Amana Tool 45814 Carbide Tipped Dovetail 14 Deg x 1 Inch D x 1 Inch CH x 1/2 SHK Router Bit
The 14 dovetail bit is used with common half-blind dovetail jigs, as well as with Omnijig, Incra and Leigh jigs.
$45.70$34.28Related Products: Dovetail Router Bits -
Amana Tool 45815 Carbide Tipped Dovetail 14 Deg x 1/2 D x 1/2 CH x 1/4 Inch SHK Router Bit
14 Degree Dovetail Router Bits
$25.60$19.20 -
Amana Tool 45825 Carbide Tipped Dovetail 8 Deg x .5/16 D x .400 CH x 1/4 Inch SHK Router Bit
The 8 dovetail bits are designed especially for use with the Leigh Dovetail Jig.
$20.50$15.38 -
Amana Tool 45826 Carbide Tipped Dovetail 8 Deg x 3/8 D x .532 CH x 1/4 Inch SHK Router Bit
The 8 dovetail bits are designed especially for use with the Leigh Dovetail Jig.
$16.95$12.71 -
Amana Tool 45829 Carbide Tipped Dovetail 8 Deg x 11/16 D x 1.025 CH x 1/2 Inch SHK Router Bit
The 8 dovetail bits are designed especially for use with the Leigh Dovetail Jig.
$21.50$16.13 -
Amana Tool 45802 Carbide Tipped Dovetail 9 Deg x 3/8 D x 3/8 CH x 1/2 Inch SHK Router Bit
The 9 dovetail bit is used for certain operations with the Incra dovetail system.
$25.55$19.16Related Products: Dovetail Router Bits -
Amana Tool 45822 Carbide Tipped Dovetail 9 Deg x 5/16 D x 3/8 CH x 1/4 Inch SHK Router Bit
The 9 dovetail bit is used for certain operations with the Incra dovetail system.
$29.95$22.46 -
Amana Tool 45800 Carbide Tipped Dovetail 9 Deg x 3/8 D x 3/8 CH x 1/4 Inch SHK Router Bit for Omnijig & Incra
The 9 dovetail bit is used for certain operations with the Incra dovetail system.
$24.15$18.11 -
Amana Tool 45809 Carbide Tipped Dovetail 7 Deg x 11/32 D x 3/8 CH x 1/4 Inch SHK Router Bit
For the Keller Dovetail Templates and certain Incra applications, 7 dovetail bits are required. (Bits for the Keller system are supplied with shank-mounted bearings.) This angle is also used in cutting stair stringers.
$31.70$23.78
