Drill 35mm

Amana Tool 203355 Carbide Tipped Hinge Boring Bit L/H 35mm D x 57mm Long x 10mm SHK

Boring machines (10mm shank) and drill presses (3/8" shank).

Amana Tool HBM-102 3-Pc Hinge Boring 57 Long x 10mm SHK Carbide Tipped Bit Set Includes Two #301008 (8mm D) and One #203351 (35mm D).

…contains: One 35mm Dia Right Hand Carbide Tipped Hinge Boring Bit Two 8mm Dia x 27mm Cut Height Left Hand Carbide Tipped Brad Point Boring BitsIndustrial Brad Point Boring Bits are Coated with a Non-Stick Coating for Longer Lasting Cutting Edge and Tool Life. Amana Tool dowel drills are coated…

Amana Tool EB-351 Carbide Tipped Economy Hinge Boring Bit R/H 35mm D x 90mm Long x 3/8 SHK

Drill presses only, right hand rotation. Economical alternative to other 35mm hinge bits.

Amana Tool FO-350 Forstner Pattern Bit 35mm D x 3/8 SHK

High Carbon Steel Drill pocket holes, flat bottom holes, etc. using any 3/8" or larger portable drill or stationary drill press. Forstner bits are well known for their ability to drill clean and chip-free holes in wood. Made of the finest quality steel, precision machined and ground on…

Timberline 660-170 Carbide Tipped Forstner Bit 35mm D x 3/8 SHK x 3-1/2 Long

Carbide tipped forstner bits were designed so the rim remains extremely sharp, especially at the leading edge. It is here that the rim stays engaged in the cut so the bit won't drift laterally. This prevents tearout at the beginning of the cut to give a smooth clean cut. The finished hole will show…

Timberline 604-740 Spade Bit with Spurs 35mm D x 6 Inch Long

Timberline 608-180 Carbide Tipped Hing Boring Bit 35mm D x 1/4 Inch SHK

For European Hinges.

Timberline 608-174 Carbide Tipped Hing Boring Bit 35mm D x 1/4 Inch SHK

For European Hinges.

Amana Tool 203350 Carbide Tipped Hinge Boring Bit R/H 35mm D x 90mm Long x 10mm SHK

Application: Drill presses only/Metric European hinges.

Amana Tool 203352 Carbide Tipped Hinge Boring Bit R/H 35mm D x 70mm Long x 10mm SHK

Boring machines (10mm shank) and drill presses (3/8" shank).

Amana Tool 203354 Carbide Tipped Hinge Boring Bit L/H 35mm D x 70mm Long x 10mm SHK

Boring machines (10mm shank) and drill presses (3/8" shank).

Amana Tool 203357 Carbide Tipped Hinge Boring Bit R/H 35mm D x 90mm Long x 10mm SHK

Boring machines (10mm shank) and drill presses (3/8" shank).

Amana Tool 203351 Carbide Tipped Hinge Boring Bit R/H 35mm D x 57mm Long x 10mm SHK

10mm Shank For European style concealed hinges. Includes side cutting "spurs" for fast, clean boring.

Timberline 620-350 Carbide Tipped Hinge Boring Bit R/H 35mm D x 57 mm Long x 10mm SHK

10mm Shank For European style concealed hinges. Includes side cutting "spurs" for fast, clean boring.

Amana Tool 204004 Carbide Tipped Brad Point Boring Bit R/H 4mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204045 Carbide Tipped Brad Point Boring Bit R/H 4.5mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204005 Carbide Tipped Brad Point Boring Bit R/H 5mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204051 Carbide Tipped Brad Point Boring Bit R/H 5.1mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204052 Carbide Tipped Brad Point Boring Bit R/H 5.2mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204055 Carbide Tipped Brad Point Boring Bit R/H 5.5mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204006 Carbide Tipped Brad Point Boring Bit R/H 6mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204065 Carbide Tipped Brad Point Boring Bit R/H 6.5mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204067 Carbide Tipped Brad Point Boring Bit R/H 6.7mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204008 Carbide Tipped Brad Point Boring Bit R/H 8mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204082 Carbide Tipped Brad Point Boring Bit R/H 8.2mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204090 Carbide Tipped Brad Point Boring Bit R/H 9mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204010 Carbide Tipped Brad Point Boring Bit R/H 10mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204012 Carbide Tipped Brad Point Boring Bit R/H 12mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204130 Carbide Tipped Brad Point Boring Bit R/H 13mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204014 Carbide Tipped Brad Point Boring Bit R/H 14mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204015 Carbide Tipped Brad Point Boring Bit R/H 15mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204016 Carbide Tipped Brad Point Boring Bit R/H 16mm D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204047 Carbide Tipped Brad Point Boring Bit R/H 3/16 D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204007 Carbide Tipped Brad Point Boring Bit R/H 1/4 D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204009 Carbide Tipped Brad Point Boring Bit R/H 3/8 D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…

Amana Tool 204111 Carbide Tipped Brad Point Boring Bit R/H 7/16 D x 70mm Long x 10mm SHK

…and Tool Life. Amana Tool dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the…