McAfee Secure. Tested Daily

Lock

1 - 12 of 112
View in: List | Grid
Sort by: Popularity | Lowest Price | Highest Price | Best Selling
Products per page: 12 18 36 48
Showing 1 - 12 of 112 | Next >
Amana Tool 55389...

SKU: 55389

Amana Tool 55389 Carbide Tipped Lock Miter 45 Deg x 1-3/4 D x 7/8 CH x 1/2 Inch SHK Router Bit for 3/8 - 3/4 Material

First piece is cut flat (horizontal) and the second is cutperpendicular (vertical) to the first for a perfect fit! The lock miter is an interlocking edge-to-edge joint, typically used at the corners of casework. Used in a table-mounted router, run at reduced speed, this bit cuts both halves of the…

$74.96

Amana Tool 55386...

SKU: 55386

Amana Tool 55386 Carbide Tipped Drawer Lock 3/4 D x 1/2 CH x 1/4 Inch SHK Router Bit

With this one bit, cut a lock joint that's ideal for quick construction of strong drawer boxes! The same bit setting is used for both halves of the joint; adjust the fence position slightly to switch between sides and fronts/backs. The drawer front (or back) is laid flat on the tabletop and fed…

$39.60

Amana Tool 55390...

SKU: 55390

Amana Tool 55390 Carbide Tipped Lock Miter 45 Deg x 2-11/16 D x 1-3/16 CH x 1/2 Inch SHK Router Bit for 1/2 - 7/8 Material

First piece is cut flat (horizontal) and the second is cutperpendicular (vertical) to the first for a perfect fit! The lock miter is an interlocking edge-to-edge joint, typically used at the corners of casework. Used in a table-mounted router, run at reduced speed, this bit cuts both halves of the…

$98.96

Amana Tool 45540...

SKU: 45540

Amana Tool 45540 Carbide Tipped Up-Shear Bit Slot Mortiser 1/2 D x 1 Inch CH x 1/2 SHK Router Bit

…deep slot and holes for tenon, especially in doors, chairs, tables etc. Special carbide with a 1" long up-shear and chip breaker for fast cuts and chip clearance. For use in lock mortising machines and door machines. WARNING!: Do not use these bits on a drill press machine under any circumstances!

$51.08

Timberline 490-10...

SKU: 490-10

Timberline 490-10 Carbide Tipped Lock Miter 45 Deg x 2-11/16 D x 1-3/16 CH x 1/2 Inch SHK Router Bit for 1/2 - 7/8 Material

First piece is cut flat (horizontal) and the second is cutperpendicular (vertical) to the first for a perfect fit! The lock miter is an interlocking edge-to-edge joint, typically used at the corners of casework. Used in a table-mounted router, run at reduced speed, this bit cuts both halves of the…

$72.07

Amana Tool 67129...

SKU: 67129

Amana Tool 67129 Steel Flat Lock Washer 11/64 Overall D x 3/32 Inner D

Steel Flat Lock WashersUsed between ball bearing and screw head or hex nut to serve as a lock washer. Part no. 67101 is used in place of a dust shield on beading bits #'s 49592 through 49622.Steel Split Lock WashersUsed between ball bearing & screw head or hex nut to serve as a lock washer.

$1.69

Amana Tool 55387...

SKU: 55387

Amana Tool 55387 Carbide Tipped Drawer Lock 1 Inch D x 1/2 CH x 1/2 SHK Router Bit

With this one bit, cut a lock joint that's ideal for quick construction of strong drawer boxes! The same bit setting is used for both halves of the joint; adjust the fence position slightly to switch between sides and fronts/backs. The drawer front (or back) is laid flat on the tabletop and fed…

$42.56

Amana Tool 67202...

SKU: 67202

Amana Tool 67202 Steel Flat Lock Washer 5/16 Overall D x 1/8 Inner D

Steel Flat Lock WashersUsed between ball bearing and screw head or hex nut to serve as a lock washer. Part no. 67101 is used in place of a dust shield on beading bits #'s 49592 through 49622.Steel Split Lock WashersUsed between ball bearing & screw head or hex nut to serve as a lock washer.

$0.45

Amana Tool 67206...

SKU: 67206

Amana Tool 67206 Steel Flat Lock Washer .356 Overall D x 1/4 Inner D

Steel Flat Lock WashersUsed between ball bearing and screw head or hex nut to serve as a lock washer. Part no. 67101 is used in place of a dust shield on beading bits #'s 49592 through 49622.Steel Split Lock WashersUsed between ball bearing & screw head or hex nut to serve as a lock washer.

$0.79

 
minicart.loading