McAfee Secure. Tested Daily
Refine collections

Radius

1 - 12 of 6697
View in: List | Grid
Sort by: Popularity | Lowest Price | Highest Price | Best Selling
Products per page: 12 18 36 48
Showing 1 - 12 of 6697 | Next >
Amana Tool 49505...

SKU: 49505

Amana Tool 49505 Carbide Tipped Corner Rounding 1/4 Radius x 3/4 Dia x 1/2 Cut Height x 1/4 Shank with 1/4 Inch Dia Lower Ball Bearing Router Bit

1/4" Diameter Ball BearingThe basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known as roundover, rounding over, and quarter-round. If…

$31.20

Amana Tool MRR108...

SKU: MRR108

Amana Tool MRR108 Miniature 1/16 Radius Corner Rounding with 3/16 Dia Ball Bearing x 5/16 Dia x 5/16 Cut Height x 1/4 Inch Shank Carbide Tipped Router Bit

No Brass Pilot = No Burn!Unlike traditional miniature router bits using brass-pilots, Amana Tool uses tiny 3/16 diameter ballbearing guides, eliminating burn marks (burnout) caused by brass pilot bits.Innovative carbide tipped design delivers a consistent edge that eliminates hand sanding &…

$28.13

Amana Tool 46384...

SKU: 46384

Amana Tool 46384 Solid Carbide Double Flute Up-Cut Ball Nose Spiral 1/4 R x 1/2 D x 2-1/8 CH x 1/2 SHK x 4 Inch Long Router Bit

Solid Carbide Double Flute Upcut Ball Nose SpiralsUsed for carving, decorative doors and sign manufacturing. These Up-Cut and Down-Cut Ball Nose Spiral Router Bits leave an excellent finish and expels chips quickly. Produces a superior finish and longer tool life Two razor-sharp cutting…

$94.46

Amana Tool MRR108...

SKU: MRR108

Amana Tool MRR108 Miniature 1/16 Radius Corner Rounding with 3/16 Dia Ball Bearing x 5/16 Dia x 5/16 Cut Height x 1/4 Inch Shank Carbide Tipped Router Bit

…(PCD) bits as well as the standard 1/2" diameter ball bearings. The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known as…

$28.13

Amana Tool 51557...

SKU: 51557

Amana Tool 51557 Carbide Tipped Bullnose 1/4 Radius x 1 Dia x 1 Cut Height x 1/2 Inch Shank Router Bit

…and bottom of the cutting edges create fillets on stock thicker than the nose diameter. Shape the full edge of a workpiece with this bullnose radius bit Industrial quality Carbide tippedMust be used with an edge guide on handheld routers or the fence on a router table.Download DXF tool…

$53.21

Amana Tool 45666 T...

SKU: 45666

Amana Tool 45666 T-Slot Radius Edge 1/8 R x 1-3/16 D x 3/4 CH x 1/2 Inch SHK Router Bit

Designed for creating T-slot wall panels (used to cut their characteristic slots for many purposes) and radiuses edges on the T-slots (allow easier adjustment of fixtures on the complied wall panels).Bits are not designed for plunging operations.

$60.53

Amana Tool RCK-420...

SKU: RCK-420

Amana Tool RCK-420 Solid Carbide Core Box 1/16 Inch Radius Insert Engraving Knife for In-Groove System

Insert Replacement Knives for the In-Groove System (tool body sold separately)Solid Carbide In-Groove CNC Insert Engraving Replacement Knives. Industrial insert knives produce crisp, clean cuts and last as least twiceas long as comparable solid carbide bits. Insert Knives are to be used with CNC…

$21.83

Amana Tool RCK-414...

SKU: RCK-414

Amana Tool RCK-414 Solid Carbide Corner Round 1/8 Inch Radius Insert Engraving Knife for In-Groove System

Insert Replacement Knives for the In-Groove System (tool body sold separately)Solid Carbide In-Groove CNC Insert Engraving Replacement Knives. Industrial insert knives produce crisp, clean cuts and last as least twiceas long as comparable solid carbide bits. Insert Knives are to be used with CNC…

$21.83

Amana Tool 46490...

SKU: 46490

Amana Tool 46490 Extra Long CNC 2D and 3D Carving Tapered Ball Nose 0.10 Deg Angle x 1/4 Dia x 1/8 Radius x 1/2 Cut Height x 1/4 Shank x 4 Inch Long x 3 Flute Solid Carbide ZrN Coated Reduced Shank Router Bit

Extra-Long Reduced Shank Section for Deeper Reach and Better Chip Clearance, Up-Cut Ball Nose for Superior Chip Ejection in CNC and CNC Carving MachinesAmana Tool's Modern Materials Finishing Geometry (MMFG) incorporates high shear, multi-flute and a ZrN coating designed for the ultimate combination…

$65.96

Amana Tool 57192...

SKU: 57192

Amana Tool 57192 Carbide Tipped Corner Rounding with Ultra-Glide Radius Bearing Solid Surface 2-1/8 D x 1 Inch CH x 3/4 R x 1/2 SHK Router Bit

…true 180 bullnose in two passes.Make the first pass with a regular 1/4" x 5/8" (#47712) steel bearing (optional). Switch to the Ultra-Guide™ radius bearing (included) for the second pass. This bearing follows the curved surface, eliminating the flat track typical of the two-pass cut with the…

$111.38

Amana Tool RCK-424...

SKU: RCK-424

Amana Tool RCK-424 Solid Carbide Core Box 1/8 Inch Radius Insert Engraving Knife for In-Groove System

Insert Replacement Knives for the In-Groove System (tool body sold separately)Solid Carbide In-Groove CNC Insert Engraving Replacement Knives. Industrial insert knives produce crisp, clean cuts and last as least twiceas long as comparable solid carbide bits. Insert Knives are to be used with CNC…

$21.83

Amana Tool 57190...

SKU: 57190

Amana Tool 57190 Carbide Tipped Corner Rounding with Ultra-Glide Radius Bearing Solid Surface 1-5/8 D x 3/4 CH x 1/2 R x 1/2 Inch SHK Router Bit

…true 180 bullnose in two passes.Make the first pass with a regular 1/4" x 5/8" (#47712) steel bearing (optional). Switch to the Ultra-Guide™ radius bearing (included) for the second pass. This bearing follows the curved surface, eliminating the flat track typical of the two-pass cut with the…

$101.21

 
minicart.loading