Raised Panel With Back Cutter

Amana Tool 54227 Carbide Tipped Traditional Raised Panel with Back Cutter 15 Deg x 1-3/8 Angle x 3-3/8 D x 1-1/16 CH x 1/2 Inch SHK Router Bit

Similar to standard horizontal raised panel bits, but with back cutter to cut inside of the panel. Includes two different bearings to allow for safer two-pass operation. Use with router table only. Carbide-Tipped.

Amana Tool 54229 Carbide Tipped Cove Raised Panel with Back Cutter 1-9/16 R x 3-3/8 D x 1-1/16 CH x 1/2 Inch SHK Router Bit

Similar to standard horizontal raised panel bits, but with back cutter to cut inside of the panel. Includes two different bearings to allow for safer two-pass operation. Use with router table only. Carbide Tipped.

Timberline 420-52 Carbide Tipped Cove Raised Panel with Back Cutter 1-37/64 R x 3-1/2 D x 1-1/4 CH x 1/2 Inch SHK Router Bit

Similar to standard horizontal raised panel bits, but with back cutter to cut inside of the panel. Includes two different bearings to allow for safer two-pass operation. Use with router table only. Carbide Tipped.

Timberline 420-54 Carbide Tipped Traditional Raised Panel with Back Cutter 15 Deg x 1-7/16 Angle x 3-1/2 D x 1-1/8 CH x 1/2 Inch SHK Router Bit

Similar to standard horizontal raised panel bits, but with back cutter to cut inside of the panel. Includes two different bearings to allow for safer two-pass operation. Use with router table only. Carbide-Tipped.

Timberline 420-50 Carbide Tipped Ogee Raised Panel with Back Cutter 7/8 R x 3-3/8 D x 1-3/16 CH x 1/2 Inch SHK Router Bit

…standard horizontal raised panel bits, but with back cutter to cut inside of the panel. Includes two different bearings to allow for safer two-pass operation. Carbide Tipped. Use with router table only. Watch now! How to make Raised Panel Doors Amana Tool Building a Raised Panel Cabinet Door …

Amana Tool 54221 Carbide Tipped Ogee Raised Panel with Back Cutter 7/8 R x 3-3/8 D x 1-1/16 CH x 1/2 Inch SHK Router Bit

…standard horizontal raised panel bits, but with back cutter to cut inside of the panel. Includes two different bearings to allow for safer two-pass operation. Carbide Tipped. Use with router table only. Watch now! How to make Raised Panel Doors Amana Tool Building a Raised Panel Cabinet Door …

AGE Series MD504 3-Pc Cove Raised Panel Door Making Set with Back Cutter

This 3-piece set combines the 2-piece Stile &?Rail cutters with oneHorizontal Raised Panel bit with back cutter. The easy-to-use set, produced from micrograin carbide, ensures perfect cuts for creating raised panel doors. Carbide tipped 1/2" shank For material 3/4" through 7/8"

AGE Series MD502 3-Pc Ogee Raised Panel Door Making Set with Back Cutter

This 3-piece set combines the 2-piece Stile &?Rail cutters with one Horizontal Raised Panel bit with back cutter. The easy-to-use set, produced from micrograin carbide, ensures perfect cuts for creating raised panel doors. Pro Series Carbide Tipped Router Bit Set Carbide tipped 1/2" shank For…

Timberline TRS-250 3-PC Ogee Raised Panel Door Making Router Bit Set, 1/2 SHK with BB and Back Cutter for 5/8 to 7/8 Inch Material. Includes 440-18 & 420-50.

…router bit set with back cutter for making stile and rail cuts with raised panels. Set was designed for raised panels on cabinet doors, frame and panel furniture and architectural paneling. Watch now! How to make Raised Panel Doors Amana Tool Building a Raised Panel Cabinet Door ¡WARNING!…

Timberline TRS-270 3-PC Cove Raised Panel Door Making Router Bit Set, 1/2 Inch SHK with BB and Back Cutter for 5/8 to 7/8 Inch Material. Includes 440-19 & 440-52.

…with back cutter that produces a 1-7/16" reveal. Both joinery-cutters and the panel-raiser feature the cove profile. Use only in a table-mounted router; the panel-raiser must be run at reduced RPM's. Custom-made hardwood storage case included.< Watch now! How to make Raised Panel…

Timberline TRS-230 3-PC Shaker Raised Panel Cabinet Door Making Router Bit Set, 1/2 SHK with BB and Back Cutter for 5/8 to 7/8 Inch Material. Includes 440-16 & 420-54.

…safe for you. Router Bits shown in video Stile & Rail Router Bits Reversible Stile & Rail Assembly - #55350 2pc Concave Stile & Rail - #55420 & #55421 Raised Panel Router Bits Ogee Raised Panel - #54118 Ogee Raised Panel w/Back Cutter - #54221

AGE Series MD508 3-Pc Shaker Raised Panel Cabinet Door Making Set

Designed for the simple shaker look for your mission-style cabinet doors, cabinets or furniture. Set includes 1-3/4" dia. 2-piece Shaker pattern/cope cutters and 3-1/2" dia. Shaker Raised Panel bit with back cutter. Carbide tipped 1/2" shank For material 3/4" through 7/8"

Amana Tool 980 Carbide Tipped 3-Wing Raised Panel Back Cutter w/BB Rub Collar 1/4 R x 3-1/2 D x 1/2 CH x 1/2 & 3/4 Bore Shaper Cutter

Amana Tool 989 Carbide Tipped 3-Wing Raised Panel Back Cutter w/BB Rub Collar 1/4 R x 3-39/64 D x 1/2 CH x 1 & 1-1/4 Bore Shaper Cutter

Amana Tool 54278 Carbide Tipped Raised Panel Back Cutter 1/4 R x 1-3/4 D x 7/16 CH x 1/2 Inch SHK Router Bit

Designed to cut back side of raised panels for a flush alignment with door frames. This cutter can be used with any of our raised panel router bits. Watch now! How to make Raised Panel Doors WARNING! For Your Safety 1. The methods illustrated here are…

Timberline 460-13 Carbide Tipped Cove Raised Panel 1-37/64 R x 3-1/2 D x21/32 CH x 2-9/16 SHK Router Bit

…quality raised panels for your cabinet doors! Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with these raised-panel bits. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel…

Amana Tool AMS-404 3-Piece Door Making 1/2 Inch SHK Router Bit Set

2 Flute - 1/2 Shank Raised Panel with Back Cutter This three-piece set combines the two-piece ogee stile-and-rail cutter set with a cove raised panel bit with a backcutter. Use only in a tablemounted router; the panel-raiser must be run at reduced RPM's.

Amana Tool RC-4012 CNC Ogee Insert Raised Panel 3-3/8 D x 3/4 CH x 1/2 Inch SHK w/ Lower Ball Bearing Router Bit

2 Flute Insert Raised panel bits for CNC machine or router table. Bits include ball bearing & anti-dust plug. May also be used with Amana Tool optional back cutter #RC-4102. Remove bearing for CNC work.

Timberline TRS-280 3-PC Cove Raised Panel Door Making Router Bit Set, 1/2 SHK w/ BB for 5/8 to 7/8 Inch Material. Includes 440-19 & 440-13.

…bit with back cutter thatproduces a 1-7/16" reveal. Both joinery-cutters and the panel-raiserfeature the cove profile. Use only in a table-mounted router; thepanel-raiser must be run at reduced RPM's. Custom-made hardwood storagecase included. Watch now! How to make Raised Panel…

Timberline 420-30 Carbide Tipped Traditional Raised Panel 15 Deg x 1-7/16 Angle x 3-3/8 D x 1/2 CH x 1/2 Inch SHK Router Bit

…quality raised panels for your cabinet doors! Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with these raised-panel bits. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel…

Amana Tool 54117 Carbide Tipped Traditional Raised Panel 15 Deg x 1-7/16 Angle x 3-3/8 D x 1/2 CH x 1/2 Inch SHK Router Bit

…quality raised panels for your cabinet doors! Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with these raised-panel bits. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel…

Amana Tool 54119 Carbide Tipped Cove Raised Panel 1-9/16 R x 3-3/8 D x 1/2 CH x 1/2 Inch SHK Router Bit

…quality raised panels for your cabinet doors! Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with these raised-panel bits. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel…

Amana Tool 54116 Carbide Tipped Traditional Raised Panel 25 Deg x 1-5/8 D x 1/2 CH x 1/2 Inch SHK Router Bit

…quality raised panels for your cabinet doors! Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with these raised-panel bits. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel…

Timberline 460-12 Carbide Tipped Cove Raised Panel 1-9/16 R x 3-3/8 D x 1/2 CH x 1/2 Inch SHK Router Bit

…quality raised panels for your cabinet doors! Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with these raised-panel bits. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel…

Timberline 420-10 Carbide Tipped Ogee Raised Panel 3/4 R x 2-5/8 D x 5/8 CH x 1/2 Inch SHK Router Bit

Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with a raised-panel bit. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and…

Timberline 420-22 Carbide Tipped Ogee Raised Panel 7/8 R x 3-3/8 D x 9/16 CH x 1/2 Inch SHK Router Bit

Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with a raised-panel bit. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and…

Amana Tool 54118 Carbide Tipped Ogee Raised Panel 3/4 R x 2-5/8 D x 5/8 CH x 1/2 Inch SHK Router Bit

Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with a raised-panel bit. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and…

Amana Tool 54121 Carbide Tipped Ogee Raised Panel 7/8 R x 3-3/8 D x 9/16 CH x 1/2 Inch SHK Router Bit

Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with a raised-panel bit. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and…

Amana Tool 54113 Carbide Tipped Classical Raised Panel 5/32 x 1-23/32 R x 3-9/16 D x 1/2 CH x 1/2 Inch SHK w/ Lower BB Router Bit

…Classical Raised Panels for your Cabinet Doors! Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with these raised-panel bits. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel…

Timberline TRS-260 3-PC Ogee Raised Panel Door Making 1/2 Inch SHK w/ BB Router Bit Set for 5/8 - 7/8 Material. Includes 440-18 & 420-22.

…making stile and rail cuts with raised panels. Set was designed for raised panels on cabinet doors, frame and panel furniture and architectural paneling. Carbide tipped Professional quality Watch now! How to make Raised Panel Doors Amana Tool Building a Raised Panel Cabinet Door ¡WARNING!…

Timberline 440-10 Carbide Tipped Traditional Reversible Stile and Rail Assembly 1-5/8 D x 7/8 CH x 1/2 Inch SHK Router Bit

…cope are cut with the same cutter, you get a perfect fit. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles. Use in a table-mounted router. Carbide Tipped. Watch now! How to make Raised Panel Doors Amana Tool Building a Raised Panel Cabinet Door …

Amana Tool 55350 Carbide Tipped Ogee Reversible Stile and Rail Assembly 1-5/8 D x 11/16 CH x 1/2 Inch SHK Router Bit

…cope are cut with the same cutter, you get a perfect fit. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles. Use in a table-mounted router. Carbide Tipped. Watch now! How to make Raised Panel Doors Amana Tool Building a Raised Panel Cabinet Door …

Timberline 440-14 Carbide Tipped 2-Piece Concave Stile and Rail 1-5/8 D x 1-1/16 CH x 1/2 Inch SHK Router Bit Set

…straight cuts with the fence, setting it tangent to the trim cutters. Use the pilot bearing only for cuts on curved rails or stiles; for cuts on curved parts 7/8" to 1" thick, a template must be used. Watch now! How to make Raised Panel Doors Amana Tool Building a Raised Panel Cabinet Door …

Amana Tool 55420 Carbide Tipped 2-Piece Concave Stile and Rail 1-5/8 D x 1-1/16 CH x 1/4 R x 1/2 Inch SHK Router Bit Set

…straight cuts with the fence, setting it tangent to the trim cutters. Use the pilot bearing only for cuts on curved rails or stiles; for cuts on curved parts 7/8" to 1" thick, a template must be used. Watch now! How to make Raised Panel Doors Amana Tool Building a Raised Panel Cabinet Door …

Amana Tool 55421 Carbide Tipped 2-Piece Concave Stile and Rail 1-5/8 D x 11/16 CH x 1/4 R x 1/2 Inch SHK Router Bit Set

…necessary -using the shims provided- after the cutters have been resharpened. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles. Watch now! How to make Raised Panel DoorsAmana Tool Building a Raised Panel Cabinet Door ¡WARNING! For Your Safety…

Timberline TRS-290 3-Piece Entry & Passage Door Making 1/2 Inch SHK Router Bit Set for 1-3/8 Passage Doors & 1-3/4 Entry Doors

…you feel that they are safe for you. Router Bits shown in video Stile & Rail Router Bits Reversible Stile & Rail Assembly - #55350 2pc Concave Stile & Rail - #55420 & #55421 Raised Panel Router Bits Ogee Raised Panel - #54118 Ogee Raised Panel w/Back Cutter - #54221