McAfee Secure. Tested Daily

Shank Joinery

1 - 12 of 80
View in: List | Grid
Sort by: Popularity | Lowest Price | Highest Price | Best Selling
Products per page: 12 18 36 48
Showing 1 - 12 of 80 | Next >
Amana Tool 55389...

SKU: 55389

Amana Tool 55389 Carbide Tipped Lock Miter 45 Deg x 1-3/4 D x 7/8 CH x 1/2 Inch SHK Router Bit for 3/8 - 3/4 Material

First piece is cut flat (horizontal) and the second is cutperpendicular (vertical) to the first for a perfect fit! The lock miter is an interlocking edge-to-edge joint, typically used at the corners of casework. Used in a table-mounted router, run at reduced speed, this bit cuts both halves of the…

$74.96

Amana Tool 53402...

SKU: 53402

Amana Tool 53402 Slotting Cutter Assembly 3 Wing x 1-7/8 Dia x 5/64 Cut Height x 1/4 Inch Shank Router Bit

Groove edges for T-moldings, splines or biscuits, and other purposes. Route tongue and groove joinery. Slotting cutters are available with either 2 wing or 3 wing cutters. Each assembly includes a cutter, bearing for a 1/2" deep cut and arbor. Use with all handheld and table mounted routers.

$24.49

Amana Tool 45831...

SKU: 45831

Amana Tool 45831 Carbide Tipped Dovetail 7 Deg x 1/2 D x 25/32 CH x 1/2 Inch SHK Router Bit for Omni Jig Joinery System

For the Keller Dovetail Templates and certain Incra applications, 7 dovetail bits are required. (Bits for the Keller system are supplied with shank-mounted bearings.) This angle is also used in cutting stair stringers.Using Dovetails on the CNC Router to Build a Shaker Style Dresser

$20.70

Amana Tool 54314 3...

SKU: 54314

Amana Tool 54314 3-Piece Carbide Tipped Tambour Door / Appliance Garage Door 1/2 Inch SHK Router Bit Set

Tambour Door/Appliance Garage Router Bit SetU.S. Patent No. 7,810,532This 3-piece router bit set is designed for creating tambours without the need for wires, canvas or glue. The unique design shapes slats that interlock, assembly is easy. Slide the slats together to create a beautiful, flexible…

$172.39

Amana Tool 55416 2...

SKU: 55416

Amana Tool 55416 2-Piece Carbide Tipped Tongue & Groove 3/8 Kerf x 1-5/8 Dia x 1-1/8 x 1/2 Inch Shank Set for 1/2 - 1-1/8 Material

Tools on this page will cut a range from 3/8" to 1-1/4" material, please check table below for details. Cut perfectly fitted tongue-and-groove joints.Tool's #55400 and #55401 are a one (1) piece assembly. Tool's #55407, #55408, #55416 and #55418 are a two (2) piece set.For the one-piece assembly, to…

$159.90

Amana Tool 55418 2...

SKU: 55418

Amana Tool 55418 2-Piece Carbide Tipped Tongue & Groove 3/8 Kerf x 1-5/8 Dia x 1-1/4 x 1/2 Inch Shank Set for 5/8 - 1-1/4 Material

Tools on this page will cut a range from 3/8" to 1-1/4" material, please check table below for details. Cut perfectly fitted tongue-and-groove joints.Tool's #55400 and #55401 are a one (1) piece assembly. Tool's #55407, #55408, #55416 and #55418 are a two (2) piece set.For the one-piece assembly, to…

$162.72

Amana Tool 48101...

SKU: 48101

Amana Tool 48101 Carbide Tipped Amerock Hinge 1-1/8 D x 21/32 CH x 1/2 Inch SHK Router Bit

This bit is designed to produce a T-slot for Amerock hinges. For best results use in a table-mounted router.

$29.48

Amana Tool 55392...

SKU: 55392

Amana Tool 55392 Carbide Tipped Finger Joint Assembly 1-9/16 D x 1-3/8 CH x 1/2 Inch SHK w/ Upper Ball Bearing Router Bit

…with their faces perfectly flush. This assembly includes five 2-wing finger cutters, one 2-wing straight cutter, a ball bearing guide, a 1/2" shank arbor, shims, spacers, and washers. The number of finger cutters used varies with the stock thickness; it can handle stock between 7/16" and 1-3/8"…

$111.90

Amana Tool 55387...

SKU: 55387

Amana Tool 55387 Carbide Tipped Drawer Lock 1 Inch D x 1/2 CH x 1/2 SHK Router Bit

With this one bit, cut a lock joint that's ideal for quick construction of strong drawer boxes! The same bit setting is used for both halves of the joint; adjust the fence position slightly to switch between sides and fronts/backs. The drawer front (or back) is laid flat on the tabletop and fed…

$42.56

Amana Tool 45796...

SKU: 45796

Amana Tool 45796 Carbide Tipped Finger Joint 1-3/8 D x 1-9/16 CH x 1/2 Inch SHK Router Bit

Cut interlocking fingers for strong end-to-end or edge-to-edge glueups with this simple bit. 2-FluteFast setupIndustrial Quality, Carbide TippedCenter the cut profile on the stock, then cut, alternating the orientation of the show face up when cutting one workpiece, down when cutting its mate. Use…

$68.66

Amana Tool 53610...

SKU: 53610

Amana Tool 53610 Carbide Tipped Box Joint 1-7/8 D x 1-3/8 CH x 1/2 Inch SHK w/ Upper Ball Bearing 3-Flute Router Bit Set

…multiple passes is to align a cutter on the bit with one of the previous cuts. The bit has five uniformly spaced 3-wing slotting cutters and a ball-bearing guide on a 1/2" shank arbor. Use in a table-mounted router for best results. Carbide tipped Maximum RPM=13,000 Industrial quality

$109.91

Amana Tool 48100...

SKU: 48100

Amana Tool 48100 Carbide Tipped Amerock Hinge 1-1/8 D x 21/32 CH x 3/8 SHK Router Bit

This bit is designed to produce a T-slot for Amerock hinges. For best results use in a table-mounted router.

$29.48

 
minicart.loading